• Motorola Commercial digital mobile radio, LCD display

Motorola Commercial digital mobile radio, LCD display

The MD622i is a cost-effective DMR mobile radio that delivers value with extensive features. Providing long-range transmission, robust design, and clear voice transmission, this compact mobile radio can be used in a variety of applications.

  • ANALOG & DIGITAL AUTO-DETECT

    Simultaneously monitors analog and digital modes and automatically responds in each mode

  • ANALOG SIGNALING

    Supports HDC1200 signaling for Caller ID and Emergency Calls in analog mode, and is compatible with MDC1200 signaling used by other analog radios. The MD622i can decode DTMF tones while in analog mode for Caller ID signaling

  • BLUETOOTH AUDIO (OPTIONAL)

    Wireless connectivity to audio devices to improve user experience.

     

  • DIGITAL ENCRYPTION

    Ensure your radio transmissions are secure with end-to-end encryption

  • DMR TIER II

    The MD622i can be deployed on DMR Tier II systems

  • DUAL MODE

    Operating in Analogue and Digital mode to aid your migration from Analogue to Digital two-way radio technology.

  • EMERGENCY ALARMS

    Emergency Alarms can be sent to other radios via the one touch emergency button. mproves worker safety and emergency

  • GPS (OPTIONAL ACCESSORY)

    Enables real-time location tracking for dispatch applications (requires external GPS module and GPS antenna)

  • HIGH QUALITY AUDIO

    Audio equalizer adjusts low, mid, and high frequency gain. Provides the best audio performance in noisy or quiet environments

  • INCREASED COVERAGE RANGE

    With a high RF power output up to 50W, the MD612i dramatically extends communication range

  • PRE-PROGRAMMED TEXT MESSAGING

    One-touch sending of up to ten pre-programmed text messages

  • PSEUDO TRUNKING

    Using pseudo-trunking, a Hytera patented technology, communication slots can be shared to improve capacity usage with transmissions either direct to devices or to repeater.

  • RADIO REGISTRATION SERVICE

    RRS allows the MD622i to communicate with dispatch and unified communications applications

  • RELIABLE AND DURABLE

    The MD622i is compliant with MIL-STD-810 G for impact strength and durability, and IP54 water and dust ingress

  • ROAMING

    This feature enables the radio to switch between sites, ensuring seamless communication.

General
Frequency Range
UHF: 400-470 MHz* VHF: 136-174 MHz
Channel Capacity
256 Channels (128 Analog, 128 Digital)
Zone Capacity
16 Zones with 16 Channels per Zone
Channel Spacing
25/12.5kHz
Operational Voltage
13.6 V ±15%
Weight
1100g (2.4 pounds)
Dimensions
6 15/32” x 1 11/16” x 1 15/16” (164 x 43 x 150 mm)
Frequency Stability
± 0.5ppm
Antenna Impedance
50Ω
LCD Display
128×64 pixels, 1.5 inch, 4 lines
Receiver
Digital Sensitivity
0.3µV (BER 5%)
Analog Sensitivity
0.22µV (Typical) (12dB SINAD) 0.4µV (20dB SINAD) 0.3µV (12dB SINAD)
Adjacent Selectivity
TIA-603: 60dB @ 12.5kHz, 70dB @ 25kHz ETSI: 60dB @ 12.5kHz, 70dB @ 25kHz
Spurious Response Rejection
TIA-603: 70dB @ 12.5/25kHz ETSI: 70dB @ 12.5/25kHz
Intermodulation
TIA-603: 70dB @ 12.5/25kHz ETSI: 65dB @ 12.5/25kHz
Hum and Noise
40dB @ 12.5kHz, 45dB @ 25kHz
Rated Audio Power Output
Internal (@ 16 ohm load): 4W External (@ 8 ohm load): 8W
Max. Audio Power Output
Internal (@ 16 ohm load): 6W External (@ 8 ohm load): 12W
Rated Audio Distortion
≤3%
Audio Response
+1 to -3dB
Conducted Spurious Emission
<-57dBm
Transmitter
RF Power Output
VHF High Power: 5-50W UHF High Power: 5-45W
FM Modulation
11K0F3E @ 12.5kHz 16K0F3E @ 25kHz
4FSK Digital Modulation
12.5kHz Data Only: 7K60FXD 12.5kHz Data and Voice: 7K60FXW
Conducted/Radiated Emission
-36dBm <1GHz / -30dBm >1GHz
Modulation Limiting
±2.5kHz @ 12.5kHz ±5.0kHz @ 25kHz
FM Hum and Noise
40dB @ 12.5kHz, 45dB @ 25kHz
Adjacent Channel Power
60dB @ 12.5kHz, 70dB @ 25kHz
Audio Response
+1 to -3dB
Audio Distortion
≤3%
Digital Vocoder Type
AMBE++
Digital Protocol
ETSI-TS102 361-1,-2,-3
Environment
Operating Temperature
22oF to +140oF (-30oC to +60oC)
Storage Temperature
-40oF to +185oF (-40oC to +85oC)
ESD
IEC 61000-4-2 (Level 4)±8kV Contact, ±15kV Air
Dust and Water Ingress
IP54 Standard
Humidity
Per MIL-STD-810 C/D/E/F/G Standard
Shock and Vibration
Per MIL-STD-810 C/D/E/F/G Standard

No downloads are available for this product
  • Antennas
  • Cables
  • Charger Accessories
  • External PTT
  • Mobile Microphones
  • Mounts
  • Speakers and Amplifiers
  • Two-way Radio Accessories
  • Wireless Bluetooth Accessories
  • BRK29 Mounting Bracket

    BRK29
    BRK29 Mounting Bracket

  • GPS04 Mobile GPS Antenna

    GPS04
    GPS04 Mobile GPS Antenna

  • PC109 Programming Cable

    PC109
    PC109 Programming Cable

  • PC60 Ignition Cable

    PC60
    PC60 Ignition Cable

  • POA121 Bluetooth Ring PTT

    POA121
    POA121 Bluetooth Ring PTT

  • POA44 Footswitch (External PTT)

    POA44
    POA44 Footswitch (External PTT)

  • PS22002 External Power Supply (300W)

    PS22002
    PS22002 External Power Supply (300W)

  • PWC10 DC Power Cable (10ft)

    PWC10
    PWC10 DC Power Cable (10ft)

  • PWC12 DC Power Cable (5M)

    PWC12
    PWC12 DC Power Cable (5M)

  • SM09D1 External Speaker (15W)

    SM09D1
    SM09D1 External Speaker (15W)

  • SM09D2 External Speaker

    SM09D2
    SM09D2 External Speaker

  • SM11A1 Palm Microphone

    SM11A1
    SM11A1 Palm Microphone

Request a Quote

Ready to talk?

Let’s work together to develop the right communications solution for your business.
Scroll to Top